One of the newest top of the
line high tech metal detectors from Gold Century. Fully loaded with all
the popular features.
Motion and Non-motion Modes
Four Operating Modes. Interchange among 4 operating modes DISC, ALL METAL,AUTO-NOTCH and NOTCH.
Press MODE touch pad to change the operating modes in following order: DISC→ALL METAL→AUTO-NOTCH→NOTCH→DISC……The operating
mode displays at bottom left corner of the LCD.
DISC mode—Power up the machine, and it enters into DISC mode automatically. In addition,
the PROBABLE depth of coin-sized objects is indicated by the rectangular segment
indicators on the left side of the display. All detected objects will cause the
depth indicator to illuminate. The depth indication is not accurate for larger
objects. In this mode, the detector can eliminate unwanted objects from detection among the categories on top of the panel from
left to right. DISC/NOTCH indicator shows detector’s current discrimination level, and an object’s
probable identification is indicated by the arrows at the top of the display.
SENS shows current sensitivity level. While DEPTH read the estimated target depth. Each time a target detected, DEPTH indicator will
illuminate. DEPTH indicator is more accurate in relative depth, the larger the reading is, the farther the
target away from the coil.
Adjusting Target DISC Range Press
ADJ to enter the machine into DISC range setting status LCD displays “DISC/NOTCH" at bottom right corner then
press“+” to increase the level of discrimination, and press “-” to
decrease the level of discrimination.
ALL METAL Mode—Press MODE pad to enter into ALL METAL mode, the detector now is in non-motion
mode. In this mode, the machine emits only a monotone sound when finding a
target, and DEPTH indicates relative target signal strength. The stronger the
signal is, the louder the tone is. Pinpoint is used to locate a coin-sized
object precisely. To move the coil above or near the target area, target will be
found soon. Target identification is useless in ALL METAL mode. To
see target identification and depth, please change the detector into relative
motion mode.
NOTCH Mode—To selectively eliminate one or several metals from the categories, you can use
NOTCH mode. DISC/NOTCH indicator shows current target discrimination level, and
an object’s probable identification is indicated by the arrows at the top of the
display. SENS shows current sensitivity level. While DEPTH indicates the probable target depth.
Adjusting Target NOTCH Range. In NOTCH mode, press ADJ to enter into DISC/NOTCH range setting status. LCD displays “DISC/NOTCH” at bottom right corner
Press + touch pad , and one press ENT to accept or reject the corresponding metal category. Press again+
,its right (left) arrow will flash, then press ENT to accept or reject another
metal category which the current arrow pointing to. Same as the others…
AUTO-NOTCH Mode—When detector is working in AUTO-NOTCH mode LCD shows “AUTO-NOTCH” at bottom side it eliminates trash metals automatically and keep the detection for coins.
Eliminated trash metals include: Bottle caps, S-CAPS, IRON/FOIL, Pull Tab.
DISC/NOTCH range not adjustable displays current target identification range. And an
object’s probable identification is indicated by the arrows at the top of the
display. SENS shows current sensitivity level. While DEPTH indicates the probable target depth.
SEVERE GROUND CONDITIONS A secondary use for the Sensitivity Control is to reduce false detection signals
caused by severe ground conditions. Although this metal detector has specially
designed circuit to reduce the ground mineralization, the ground conditions in
field hunting cannot be anticipated. Highly magnetic soils found in mountainous
can cause the detector to emit tones when metal objects are not present. High
saline content soils and sands can sometimes cause the detector to false. If the
detector emits false, non-repeatable, signals, REDUCE THE SENSITIVITY.
MULTIPLE TARGETS If you suspect the presence of deeper targets beneath a shallower target, reduce
the sensitivity to eliminate the detection of the deeper targets, in order to
properly locate and identify the shallower target. Surface Elimination. Press SURF ELIM to enter into or quit Surface
Elimination mode. SURF ELIM only works in motion mode. SURF ELIM can improve the accuracy of detection result in soil with mass trash metal.
It restrains the signal from trash metal in soil surface layer, and balance the
signal from large target. But detector’s sensitivity is decreased in this mode.
One of the newest top of the line high tech metal detectors from Gold Century. Fully loaded with all
the popular features.
- Frequency: 6.5~6.7KHz
- Static Current 35mA
- Min. voltage 11.6V
- Low Voltage indication 11.6~12.4V
- 8.5” waterproof search coil
- Sensitivity ALL METAL 26cm
- DISC 24cm
Online owners manual click here
1 Year Warrantee.
SKU: GC1030
